0
NLM5000B 5km Mission-Critical Laser Ranging Sensor
The NLM5000B is a professional-grade telemetry engine engineered for long-range spatial awareness in high-resilience environments. Utilizing eye-safe 1535nm DPSS technology, this High-Resilience Laser Ranging Sensor delivers reliable distance data across diverse atmospheric conditions while maintaining a footprint optimized for weight-sensitive aerial and portable platforms.
- Strategic Range: Reliable detection of standardized assets at distances up to 8000m.
- Integration Profile: Total system weight constrained to ≤ 75g ±10g for streamlined mounting.
- Thermal Resilience: Operational across a wide thermal gradient from -40°C to +60°C.
- Near-Field Accuracy: Optimized signal processing limits the blind zone to ≤30m.
I. NLM5000B 1535nm DPSS Er:Glass Telemetry Engine
Precision Erbium-Glass Laser Integration for High-Resilience Infrastructure Monitoring
The NLM5000B represents a significant advancement in 1535nm DPSS laser technology, purposefully engineered to serve as a High-Resilience Laser Ranging Sensor for demanding field conditions. This module provides a professional-grade solution for long-range distance sensing, capable of ranging 2.3×2.3m targets at distances ≥5000m and extending to 8km for standardized vehicular assets under optimal visibility conditions of ≥15km. Designed with ruggedized architecture, the NLM5000B maintains an accuracy rate of ≥ 98% even in challenging environments characterized by high humidity or fluctuating temperatures. Its non-contact measurement principle and Class 1 eye-safe compliance make this High-Resilience Laser Ranging Sensor an ideal candidate for integration into drone surveying equipment and remote monitoring solutions where safety and precision are paramount. The unit facilitates efficient data processing through its dual RS422/TTL communication interface, allowing for seamless synchronization with complex control systems and machine vision platforms.
II. High-Resilience Architectural Advantages
- Elite Thermal Management: Sustains continuous 10Hz operation for 60 minutes at ambient 25°C and 30 minutes at elevated 70°C temperatures.
- Signal Integrity: Beam divergence is tightly controlled to ≤ 0.4±0.1mrad, ensuring high energy density on distant targets, a core requirement for a reliable High-Resilience Laser Ranging Sensor.
- Operational Intelligence: Built-in self-test functions perform comprehensive diagnostic checks, including non-lasing verification of all status parameters.
- Energy Optimization: Low-power mode implementation allows for <1mA standby current, maximizing the operational lifecycle of portable power systems.
III. NLM5000B Strategic Deployment Scenarios
Aerospace and Aviation Infrastructure
As a premium High-Resilience Laser Ranging Sensor, the module serves as a critical component for airborne electro-optical systems and satellite auxiliary equipment, where its compact footprint fits within tight payload envelopes for mission-critical geomatics.
Security & Infrastructure Monitoring
Engineered for remote power grid inspection and geomatic surveying, this industrial-grade 5km sensor provides the necessary range and accuracy to survey large-scale infrastructure safely from a distance.
Professional High-Resilience Support
Designed for specialized system integration and ruggedized vehicle deployment, the module facilitates strategic target ranging in field operations while adhering to strict IEC 60825-1 eye safety standards.
IV. NLM5000B Technical Specification Matrix
| Parameter Metric | Specification Value |
|---|---|
| Pulse Repetition Frequency (PRF) | 1Hz to 10Hz (Programmable/Adjustable) |
| Ranging Capability (2.3×2.3m Target) | ≥ 30m to 5000m |
| Extended Asset Detection | ≥ 6.5km (Buildings); ≥ 8km (Standardized Vehicles) |
| Measurement Accuracy Rate | ≥ 98% (Accuracy Deviation: ±1m / ±2m) |
| Laser Wavelength | 1535nm ±5nm (Class 1 Eye-Safe IEC 60825-1) |
| Blind Zone Detection | ≤ 30m |
| Beam Divergence | ≤ 0.4 ± 0.1mrad |
| Physical Dimensions (Main & Daughterboard) | Main: ≤ 54×34×45mm | Daughter: 55×29×11mm (±1mm) |
| System Weight | ≤ 75g ±10g |
| Communication Interface & Baud Rate | RS422 / TTL (115200bps) |
| Supply Voltage (DC) | DC 9V ~ 15V |
| Power Consumption Profile | Standby1 ≤1.5W | Standby2 ≤3.5W (10Hz) | Peak ≤7W |
| Operating / Storage Temperature | -40°C to +60°C / -55°C to +65°C |
| Atmospheric Test Conditions | Visibility ≥15km, Temp 25°C, RH ≤70%, 0.3 Reflectivity |
| Environmental Protection | IP67 Ruggedized |
V. High-Resilience Power & Electrical Interface
- Standby Current Profile: Implementation of <1mA standby current for ultra-low power consumption.
- Power Consumption Levels: Standby 1 (Post-Power Lasing Failure) ≤1.5W; Standby 2 (10Hz Operation) ≤3.5W; Peak Output ≤7W.
- System Integration: Communication via RS422/TTL interfaces at 115200bps, supporting version queries and in-field firmware updates.
Host connector series: DF52-10P-0.8C (Mating with DF52-10S-0.8H).
| Pin No. | Label | Electrical Definition | Remarks |
|---|---|---|---|
| P-1, P-2 | VIN+ | Input Power Positive | DC 9V~15V |
| P-3, P-4 | COM | Input Power Negative | Reference Ground |
| P-5, P-6 | RS422_TXD+/- | Differential Signal Output | Rangefinder to Host |
| P-7, P-8 | RS422_RXD-/+ | Differential Signal Input | Host to Rangefinder |
| P-9 | TTL_TX | UART TTL Signal Output | Logic High Level |
| P-10 | TTL_RX | UART TTL Signal Input | Logic Control |
VI. Mechanical and Optical Interface Specifications for 5km Sensors
The NLM5000B structural blueprint is designed for rigid fixation on aerospace platforms, utilizing a secure modular mounting pattern that segregates the main control unit and external daughterboard for flexible payload distribution.
Effective Aperture: Tx Ø10mm, Rx Ø25mm | Mounting: 3 × ST2.5 threaded holes (depth 5.5mm).
- Aperture Configuration: Integrated Φ10mm laser emission window and Φ25mm large-aperture reception window optimized for high signal-to-noise ratios.
- Spatial Footprint: Main Control Board (≤54x34x45mm) and External Daughterboard (55x29x11mm) allow for compartmentalized installation.
- Durability Factors: Engineered to resist direct sunlight and rapid temperature shifts within a rugged IP67 enclosure.
VII. Universal Adaptability for High-Resilience Environments
The NLM5000B provides a versatile foundation for global deployment in complex infrastructure applications. By integrating a dedicated PC Software Suite and SDK, the module enables secondary development for custom industrial analysis and machine vision integration. Its capability for in-field updates and multi-mode operation (single or 1-10Hz continuous) ensures that the sensor can adapt to evolving operational requirements in aerospace, aviation, and strategic geomatics. This High-Resilience Laser Ranging Sensor delivers consistent, high-precision distance data while maintaining operational integrity against electrostatic environments and rugged environmental stressors.
Additional information
| Weight | 6098603 lbs |
|---|
VIII. Elite 1535nm Er:Glass Ranging Solutions
-
NLMU3000A 1535nm Low-Altitude Security Laser Sensor
VIEW SPECSRNG3000mPWRSTBY ≤ 1.5W AVG ≤ 2.8-4.5W PK ≤ 4.5-6.2WDim.≤ 143 × 114 × 80mmWt.≤ 660g 
NLM8000K 8km Strategic Laser Rangefinder & Industrial Sensor
VIEW SPECSRNG8000mPWR≤ 5WDim.≤87.5 × 52 × 41.5mmWt.≤ 203gNLM8000A 8km Strategic Laser Ranging Module
VIEW SPECSRNG8000mPWRAVG ≤ 3W PK ≤ 6WDim.≤ 68 × 42.5 × 55mmWt.≤ 100 ± 10gNLM12000L 12km Ultra-Rugged Laser Rangefinder Module
VIEW SPECSRNG12000mPWRSTBY ≤ 150mW AVG ≤ 6W PK ≤ 14WDim.≤ 100 × 60 × 70mmWt.< 240g
